Washer Door 60×80

£113.00

Front for an integrated washing machine.

Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below:

Hinge position *

Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa.

We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven't bought your next washer yet.

Grip position *

The grip will be milled out directly from the front itself. Please choose the position for the integrated grip by selecting the relevant image above.

Please select the positioning for the hinge drillings. The default hinge positioning for a Metod door is CC 49/49. All washers are however different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. Please let us know the preferred positioning and we will be happy to drill accordingly already at the production.

Top hinge position*

Must be at least 59 mm to not conflict with the milled grip.

Bottom hinge position*

Important *

If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept.

Total: £113.00
SKU: 597x797 G-1 Category: